Optical Fiber RoHS Compliant 10gbps 80km Tunable XFP Optical Transceiver

• Usage: Telephone, Computer, Workstation, Server, Mobile phone, Laptop
• Type: Wireless
• Support Network: GSM
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: GFC-OLTDXX1XL-CD80
• Information content: Data
• Certification: CE, ISO, RoHS
• Condition: New
• Delivery Time: 3-7 Days
• Warranty: 3 Years
• Distance: 80km
• Transport Package: Antistatic Bag
• Specification: 10G
• Trademark: GFC
• Origin: Zhejiang China
• HS Code: 8517706000
• Production Capacity: 50K/Month

Product Description

Product Features

• Supports 9.95 to 11.3Gb/s bit rates
• Simplex LC Connector
• Hot-pluggable XFP footprint
• Full C-band tunable transmitter and APD receiver
• 50GHz ITU Grid, C-Band(1528.77~1563.86nm)
• Applicable for 80km SMF connection
• Low power consumption, < 3.5W
• Digital Diagnostic Monitor Interface
• Operating case temperature: Commerical:0 to 70 °C

 

Applications

• DWDM 10G SONET/SDH
• DWDM, IEEE 10GBASE-ZR based Ethernet
• ITU G.709 / OTN FEC applications
• Other optical link

 

Product Descriptions

GFC-OLTDXX1XL-CD80 is tunable XFP Transceiver exhibits excellent wavelength stability, supporting operation at 100GHz channel, cost effective module. It is designed for 10G  tunable  SDH 10GBASE-ZR and 10G Fiber- Channel applications. The transceiver consists of two sections: The transmitter section incorporates a tunable EML laser. And the receiver section consists of a APD photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. The tunable XFP transceiver provides an enhanced monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.
 

Functional Diagram

Absolute Maximum Ratings
 

Parameter	Symbol	Min.	Max.	Unit	Note
Supply Voltage	Vcc3	-0.3	3.63	V
	Vcc2	-0.3	1.98	V
	Vcc5	-0.5	6	V
Storage Temperature	TS	-40	85	°C
Relative Humidity	RH	0	85	%

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.


 

General Operating Characteristics

 

Parameter	Symbol	Min.	Typ	Max.	Unit	Note
Data Rate	DR	9.95	10.3125	11.3	Gb/s
Supply Voltage	Vcc3	3.13	3.3	3.47	V
	Vcc2	1.71	1.8	1.98	V
	Vcc5	4.75	5	5.25	V
Supply Current	Icc3			750	mA
	Icc2			500	mA
	Icc5			1000	mA
Operating Case Temp.	Tc	0		70	°C

Electrical Characteristics (_TOP(C) = 0 to 70 ºC, V_CC = 3.13 to 3.47 V)
 

Parameter	Symbol	Min.	Typ	Max.	Unit	Note
Transmitter
Differential data input swing	VIN,PP	120		820	mVpp	1
Transmit Disable Voltage	VD	2.0		Vcc	V
Transmit Enable Voltage	VEN	Vee		Vee+0.8
Input differential impedance	Rin		100		Ω
Receiver
Differential data output swing	Vout,pp	300		850	mVpp	2
Output rise time and fall time	Tr, Tf	28			Ps	3
LOS asserted	VLOS_F	VCC-0.8		Vcc	V	4
LOS de-asserted	VLOS_N	Vee		Vee+0.8	V	4

Notes:

1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
2. Into 100 differential termination.
3. 20 - 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1's and four 0's sequence in the PRBS 9 is an acceptable alternative.
4. LOS is an open collector output. Should be pulled up with 4.7k - 10k on the host board. Normal operation is logic 0; loss of signal is logic 1.

Optical Characteristics (T_OP(C) = 0 to 70 ºC, T_OP(I) =-40 to 80 ºC,V_CC = 3.13 to 3.47 V)
 

Parameter	Symbol	Min.	Typ	Max.	Unit	Note
Transmitter
Operating Wavelength	λc	1528.384		1568.773	nm
Center Wavelength (End of Life)	λc_EOL		λc±25pm
Ave. output power (Enabled)	PAVE	-1		3	dBm	1
Side-Mode Suppression Ratio	SMSR	30			dB
Extinction Ratio	ER	9			dB
Relative Intensity Noise	RIN			-128	dB/Hz
Output Optical Eye	IEEE 802.3-2005 Compliant
Receiver
Operating Wavelength	λ	1528.384		1568.773	nm
Receiver Sensitivity	PSEN1			-23	dBm	2
Overload	PAVE			-7	dBm
LOS Assert	Pa	-35			dBm
LOS De-assert	Pd			-24	dBm
LOS Hysteresis	Pd-Pa	0.5			dB

Notes:

1. Average power figures are informative only, per IEEE 802.3ae.
2. Measured with worst ER=9; BER<10-12; 231 - 1 PRBS.

Management Interface

The transceivers provide serial ID memory contents and diagnostic information about the present operating conditions by the 2-wire serial interface (SCL, SDA).
The Module provides diagnostic information about the present operating conditions. The transceiver generates this diagnostic data by digitization of internal analog signals Alarm/warning threshold data is written during device manufacture. Received power monitoring, transmitted power monitoring, bias current monitoring, supply voltage monitoring and temperature monitoring all are implemented.
The digital diagnostic memory map specific data field defines as following.

 

TYPICAL INTERFACE CIRCUIT

Package Dimensions