Basic Info.
Model NO.
GFC-OLCF85TXMX-CDS1
Certification
CE, ISO, RoHS
Transport Package
Antistatic Bag
Specification
100Gbps 100m
Product Description
Product Features
- Supports 103.1Gb/s to 112Gb/s bit rates
- MPO 24 receptacle optical interface
- CPPI electrical interface
- Uncooled 10x10Gb/s 850nm transmitter
- 10 parallel electrical serial interface
- Applicable for 100m with OM3 MMF and 150m with OM4 MMF
- Low power consumption <4W
- Digital Diagnostic Monitor Interface
- MDIO Communication Interface
- Compliant with 100GBASE-SR10
- Operating case temperature: Commerical:0 to 70 °C
Applications
- 100GBASE-SR10 Ethernet
- 10x11.2Gb/s Multimode OTN
- 10x 10GE-SRLite Ethernet
Standards
- Compliant with IEEE 802.3ba
- Compliant with CFP2 MSA hardware specifications
- Compliant with CFP2 MSA management specifications
Functional Description
GFC-OLCF85TXMX-CDS1, the 100GE SR10 CFP2 (ALT1) transceiver modules are designed for use in 100 Gigabit Ethernet links and 10x11.2G OTN client interfaces over multimode fiber. They are compliant with the CFP2 MSA and with IEEE 802.3ba 100GBASE-SR10. Digital diagnostics functions are available via the MDIO interface.Functional Diagram
Absolute Maximum Ratings Parameter | Symbol | Min. | Max. | Unit | Note |
Supply Voltage | Vcc | -0.5 | 3.6 | V | |
Storage Temperature | TS | -40 | 85 | °C | |
Relative Humidity | RH | 0 | 85 | % | |
Receiver Damage Threshold | PRdmg | 5 | | | Per Lane |
Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.Recommended Operating Conditions
Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Data Rate | DR | | 103 | 112 | Gb/s | |
Supply Voltage | Vcc | 3.14 | | 3.47 | V | |
Operating Case Temp. | Tc | 0 | | 70 | °C | |
Electrical Characteristics (TOP = 0 to 70ºC, VCC = 3.13 to 3.47 V) Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Transmitter (per Lane) |
Data Rate Per Lane | DRPL | | 10.3125 | 11.1810 | Gb/s | 1 |
Input voltage tolerance | VIN | -0.3 | | 4 | V | |
Differential data input swing | VIN,PP | 120 | | 1200 | mVpp | 2 |
Differential input threshold | VIN,TH | | 50 | | mV | |
J2 Jitter Tolerance | JT2 | 0.17 | | | UI | |
J9 Jitter Tolerance | JT9 | 0.29 | | | UI | |
Receiver (per Lane) |
Output voltage | VOUT | -0.3 | | 4.0 | V | |
Differential data output swing | VOUT,PP | 300 | | 800 | mVpp | 3 |
output voltage (RMS) | PSEN2 | | | 7.5 | mV | |
Termination mismatch at 1 MHx | PPx | | | 5 | % | |
Output rise time and fall time | Tr, Tf | | 28 | | Ps | 4 |
J2 Jitter output | JOT2 | | | 0.42 | UI | |
J9 Jitter output | JOT9 | | | 0.65 | UI | |
Power Supply Ripple Tolerance | PRS | Per CFP MSA | mVpp | |
Notes:1. +/- 100ppm at 10.3125 Gb/s and +/-20ppm at 11.1810 Gb/s.- After internal AC coupling. Self-biasing 100Ωdifferential input.
- AC coupled with 100Ωdifferential output impedance. Limiting output. 4.20%~80%
Optical Characteristics (TOP = 0 to 70 °C, VCC = 3.13 to 3.47 V) Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Transmitter (per Lane) |
Data Rate Per Lane | DRPL | | 10.3125 | 11.1810 | Gb/s | 1 |
Center wavelength | λ | 840 | 850 | 860 | nm | |
RMS Spectral Width | Δλ | | | 0.65 | nm | |
Average Power per Lane | PAVEp | -8 | | 1 | dBm | |
Transmit OMA per Lane | POMA | -6 | | 3.0 | dBm | 2 |
Average launch Power of OFF | DP | | | -30 | dB | |
Peak Power per Lane | PP | | | 4.0 | dBm | |
TDP per Lane | TDP | | | 4 | dBm | |
Extinction Ratio | ER | 3.0 | | | dB | |
Return Loss Tolerance | | | | 12 | dB | |
Relative Intensity Noise | RIN | | | -128 | dB/Hz | 3 |
Transmitter eye mask definition {X1, X2, X3, Y1, Y2, Y3} | | 0.23, 0.34, 0.43, 0.27, 0.35, 0.4 | | |
Receiver (per Lane) |
Center wavelength | λ | 840 | 850 | 860 | nm | |
Receiver Sensitivity per Lane | PSEN1 | | | -9.9 | dBm | 4 |
Receiver Sensitivity (OMA) per Lane | PSEN2 | | | -5.4 | dBm | |
Peak Power, per lane | PPx | | | 4 | dBm | |
Overload,perlane | PAVE | 1 | | | dBm | |
Receiver Reflectance | Rrx | | | -12 | dB | |
Dispersion penalty , per lane | TDP | | | 1.9 | dB | |
Stressed eye J2 jitter, per Lane | JE2P | | 0.35 | | UI | |
Stressed eye J9 jitter, per Lane | JE9P | | 0.47 | | UI | |
Jitter tolerance [OMA], per lane | JTP | | -5.4 | | dBm | |
LOS De-Assert | Pa | -11 | | | dBm | |
LOS Assert | Pd | | | -25 | dBm | |
LOS Hysteresis | Pd-Pa | 0.5 | | | dB | |
Notes:- Transmitter consists of 10 lasers operating at a maximum rate of 11.1810 Gb/s each.
- Even if TDP is <0.9dB, the OMA min must exceed this value.
- RIN is scaled by 10*log (10/4) to maintain SNR outside of transmitter.
- Measured using DUT Tx and DUT Rx; no golden transmitters shall be used.
Pin Description
The CFP2 connector has 104 pins which are arranged in Top and Bottom rows. The pin map is shown in Piture and Table below. PIN# | Description | PIN# | Description |
1 | GND | 104 | GND |
2 | TX9n | 103 | TX7n |
3 | TX9p | 102 | TX7p |
4 | GND | 101 | GND |
5 | TX8n | 100 | TX6n |
6 | TX8p | 99 | TX6p |
7 | 3.3V_GND | 98 | GND |
8 | 3.3V_GND | 97 | TX5n |
9 | 3.3V | 96 | TX5p |
10 | 3.3V | 95 | GND |
11 | 3.3V | 94 | TX4n |
12 | 3.3V | 93 | TX4p |
13 | 3.3V_GND | 92 | GND |
14 | 3.3V_GND | 91 | TX3n |
15 | VND_IO_A | 90 | TX3p |
16 | VND_IO_B | 89 | GND |
17 | PRG_CNTL1 | 88 | TX2n |
18 | PRG_CNTL2 | 87 | TX2p |
19 | PRG_CNTL3 | 86 | GND |
20 | PRG_ALRM1 | 85 | TX1n |
21 | PRG_ALRM2 | 84 | TX1p |
22 | PRG_ALRM3 | 83 | GND |
23 | GND | 82 | TX0n |
24 | TX_DIS | 81 | TX0p |
25 | RX_LOS | 80 | GND |
26 | MOD_LOPWR | 79 | (REFCLKn) |
27 | MOD_ABS | 78 | (REFCLKp) |
28 | MOD_RSTn | 77 | GND |
29 | GLB_ALRMn | 76 | RX7n |
30 | GND | 75 | RX7p |
31 | MDC | 74 | GND |
32 | MDIO | 73 | RX6n |
33 | PRTADR0 | 72 | RX6p |
34 | PRTADR1 | 71 | GND |
35 | PRTADR2 | 70 | RX5n |
36 | VND_IO_C | 69 | RX5p |
37 | VND_IO_D | 68 | GND |
38 | VND_IO_E | 67 | RX4n |
39 | 3.3V_GND | 66 | RX4p |
40 | 3.3V_GND | 65 | GND |
41 | 3.3V | 64 | RX3n |
42 | 3.3V | 63 | RX3p |
43 | 3.3V | 62 | GND |
44 | 3.3V | 61 | RX2n |
45 | 3.3V_GND | 60 | RX2p |
46 | 3.3V_GND | 59 | GND |
47 | RX9n | 58 | RX1n |
48 | RX9p | 57 | RX1p |
49 | GND | 56 | GND |
50 | RX8n | 55 | RX0n |
51 | RX8p | 54 | RX0p |
52 | GND | 53 | GND |
Fiber number | Channel | Electrical pin | Fiber | Channel | Electrical pin |
1 | Unused | | 13 | Unused | |
2 | RX0 | 54,55 | 14 | TX0 | 81,82 |
3 | RX1 | 57,58 | 15 | TX1 | 84,85 |
4 | RX2 | 60,61 | 16 | TX2 | 87,88 |
5 | RX3 | 63,64 | 17 | TX3 | 90,91 |
6 | RX4 | 66,67 | 18 | TX4 | 93,94 |
7 | RX5 | 69,70 | 19 | TX5 | 96,97 |
8 | RX6 | 72,73 | 20 | TX6 | 99,100 |
9 | RX7 | 75,76 | 21 | TX7 | 102,103 |
10 | RX8 | 51,50 | 22 | TX8 | 6,5 |
11 | RX9 | 48,47 | 23 | TX9 | 3,2 |
12 | Unused | | 24 | Unused | |
Address:
3rd Floor, Building 69, Headquarters Business Garden, Nanhu District, Jiaxing, Zhejiang, China
Business Type:
Manufacturer/Factory, Group Corporation
Business Range:
Electrical & Electronics, Manufacturing & Processing Machinery, Service, Textile
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
As the fixed supplier of the three China National Telecommunications Services Providers (China Mobile, China Unicom and China Telecom). Zhejiang GuangFan Communications Technology Co., Ltd. (member of G. F. Group) has been specializing in communication industry since 2011.
Our trading company and manufacture plant both locate in Jiaxing City, which is in the east of China, with a distance of about 1.5hours by car from Shanghai City. Based on the best geographical position, we can send the products to the customers all over the world economically and efficiently. With own standardize factory and professional team, we promise to provide you high-quality products, professional service and competitive price.
Our aim is to be one of the most professional products, system and service provider in the communication industry. Expecting to become your long-term partner in China.