Basic Info.
Model NO.
GFC-OLXBxx1XL-CDH1
Certification
CE, ISO, RoHS
Transport Package
Antistatic Bag
Product Description
Product Features
- Supports 9.95 to 11.3Gb/s bit rates
- Simplex LC Connector
- Hot-pluggable XFP footprint
- Cooled 1530nm EML transmitter, 1550nm APD receiver
- Cooled 1550nm EML transmitter, 1530nm APD receiver
- Applicable for 100km SMF connection
- Low power consumption, < 3.5W
- Digital Diagnostic Monitor Interface
- Optical interface compliant to IEEE 802.3ae 10GBASE-ZR
- Electrical interface compliant to SFF-8431
- Operating case temperature: Commerical:0 to 70 °C
Applications- 10GBASE-BX 10.3125Gb/s Ethernet
- 10GBASE-BX 9.953Gb/s Ethernet
- SONET OC-192 &SDH STM I-64.1
- Other optical link
Product Descriptions
GFC-OLXBxx1XL-CDH1 transceivers are designed for 10G Ethernet 10G, and it can supportdata-rate from 9.953Gb/s to 11.3Gb/s.Digital diagnostics are avail-able via I2C interface as specified in the XFP MSA.The transceiver designs are optimized for high per-formance and cost effective to supply customers the best solutions for data-com and telecom applications.
Absolute Maximum Ratings Parameter | Symbol | Min. | Max. | Unit | Note |
Supply Voltage | Vcc | -0.5 | 4.0 | V | |
Storage Temperature | TS | -40 | 85 | °C | |
Relative Humidity | RH | 0 | 85 | % | |
Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver. General Operating Characteristics
Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Data Rate | DR | 9.95 | 10.3125 | 11.3 | Gb/s | |
Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | |
Supply Current | Icc5 | | | 450 | mA | |
Operating Case Temp. | Tc | 0 | | 70 | °C | |
Electrical Characteristics (TOP(C) = 0 to 70 ºC, VCC = 3.13 to 3.47 V) Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Transmitter |
Differential data input swing | VIN,PP | 120 | | 850 | mVpp | 1 |
Transmit Disable Voltage | VD | VCC-0.8 | | Vcc | V | |
Transmit Enable Voltage | VEN | Vee | | Vee+0.8 |
Input differential impedance | Rin | | 100 | | Ω | |
Receiver |
Differential data output swing | Vout,pp | 300 | | 850 | mVpp | 2 |
Output rise time and fall time | Tr, Tf | 28 | | | Ps | 3 |
LOS asserted | VLOS_F | VCC-0.8 | | Vcc | V | 4 |
LOS de-asserted | VLOS_N | Vee | | Vee+0.8 | V | 4 |
Notes:
- Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
- Into 100 differential termination.
- 20 - 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1's and four 0's sequence in the PRBS 9 is an acceptable alternative.
- LOS is an open collector output. Should be pulled up with 4.7k - 10k on the host board. Normal operation is logic 0; loss of signal is logic 1.
Optical Characteristics (TOP(C) = 0 to 70 ºC,VCC = 3.13 to 3.47 V) Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Transmitter |
Operating Wavelength | λ | 1522.50 | 1530 | 1537.5 | nm | |
1542.5 | 1550 | 1557.5 | |
Ave. output power (Enabled) | PAVE | 0 | | 5 | dBm | 1 |
Side-Mode Suppression Ratio | SMSR | 30 | | | dB | |
Extinction Ratio | ER | 9 | | | dB | |
RMS spectral width | Δλ | | | 1 | nm | |
Rise/Fall time (20%~80%) | Tr/Tf | | | 50 | ps | |
Dispersion penalty | TDP | | | 3.2 | dB | |
Relative Intensity Noise | RIN | | | -128 | dB/Hz | |
Output Optical Eye | Compliant with IEEE 0802.3ae |
Receiver |
Operating Wavelength | λ | 1542.5 | 1550 | 1557.5 | nm | |
1522.50 | 1530 | 1537.5 | |
Receiver Sensitivity | PSEN | | | -24 | dBm | 2 |
Overload | PAVE | | | -7 | dBm | |
LOS Assert | Pa | -35 | | | dBm | |
LOS De-assert | Pd | | | -25 | dBm | |
LOS Hysteresis | Pd-Pa | 0.5 | | | dB | |
Notes:
- Average power figures are informative only, per IEEE 802.3ae.
- Measured with worst ER=9; BER<10-12; 231 - 1 PRBS.
PIN # | Name | Function | Name/Description | Notes |
1 | | GND | Module Ground | 1 |
2 | | VEE5 | Optional -5.2V Power Supply (Not requireed) | |
3 | LVTTL-I | MOD_DESEL | Module De-select; When held low allows the module to respond to 2-wire serial interface | |
4 | LVTTL-O | INTb | Interrupt; Indicates presence of an important condition which can be read via the 2-wire serial interface | 2 |
5 | LVTTL-I | TX_DIS | Transmitter Disable; Turns off transmitter laser output | |
6 | | VCC5 | +5V Power Supply (Not required) | |
7 | | GND | Module Ground | 1 |
8 | | VCC3 | +3.3V Power Supply | |
9 | | VCC3 | +3.3V Power Supply | |
10 | LVTTL-I/O | SCL | 2-Wire Serial Interface Clock | 2 |
11 | LVTTL-I/O | SDA | 2-Wire Serial Interface Data Line | 2 |
12 | LVTTL-O | MOD_Abs | Indicates Module is not present. Grounded in the Module | 2 |
13 | LVTTL-O | MOD_NR | Module Not Ready; Indicating Module Operational Fault | 2 |
14 | LVTTL-O | RX_LOS | Receiver Loss Of Signal Indicator | 2 |
15 | | GND | Module Ground | 1 |
16 | | GND | Module Ground | 1 |
17 | CML-O | RDN | Receiver Inverted Data Output | |
18 | CML-O | RDP | Receiver Non-Inverted Data Output | |
19 | | GND | Module Ground | 1 |
20 | | VCC2 | +1.8V Power Supply (Not required). | |
21 | LVTTL-I | P_DOWN/RST | Power down; When high, requires the module to limit power consumption to 1.5W or below. 2-Wire serial interface must be functional in the low power mode. | |
21 | LVTTL-I | P_DOWN/RST | Reset; The falling edge initiates a complete reset of the module including the2-wire serial interface, equivalent to a power cycle. | |
22 | | VCC2 | +1.8V Power Supply (Not required) | |
23 | | GND | Module Ground | 1 |
24 | PECL-I | REFCLK+ | Not used, internally terminated to 50ohm (100ohm diff). | 3 |
25 | PECL-I | REFCLK- | Not used, internally terminated to 50ohm (100ohm diff). | 3 |
26 | | GND | Module Ground | 1 |
27 | | GND | Module Ground | 1 |
28 | CML-I | TD- | Transmitter Inverted Data Input | |
29 | CML-I | TD+ | Transmitter Non-Inverted Data Input | |
30 | | GND | Module Ground | 1 |
Notes: - Module circuit ground is isolated from module chassis ground within the module.
- Open collector; should be pulled up with 4.7k - 10k ohms on host board to a voltage between 3.15Vand 3.6V.
- Reference Clock input is not required.
Address:
3rd Floor, Building 69, Headquarters Business Garden, Nanhu District, Jiaxing, Zhejiang, China
Business Type:
Manufacturer/Factory, Group Corporation
Business Range:
Electrical & Electronics, Manufacturing & Processing Machinery, Service, Textile
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
As the fixed supplier of the three China National Telecommunications Services Providers (China Mobile, China Unicom and China Telecom). Zhejiang GuangFan Communications Technology Co., Ltd. (member of G. F. Group) has been specializing in communication industry since 2011.
Our trading company and manufacture plant both locate in Jiaxing City, which is in the east of China, with a distance of about 1.5hours by car from Shanghai City. Based on the best geographical position, we can send the products to the customers all over the world economically and efficiently. With own standardize factory and professional team, we promise to provide you high-quality products, professional service and competitive price.
Our aim is to be one of the most professional products, system and service provider in the communication industry. Expecting to become your long-term partner in China.