Optical Fiber RoHS Compliant 10GB/S XFP Bi-Directional Transceiver, 40km Reach

• Usage: Telephone
• Type: Wireless
• Support Network: GSM
• Information content: Data
• Certification: CE, ISO, RoHS
• Condition: New
• Model NO.: GFC- OLXBxx1XL-CD40
• Delivery Time: 3-7 Days
• Warranty: 3 Years
• Distance: 40km
• Transport Package: Antistatic Bag
• Specification: 10G 40KM
• Trademark: GFC
• Origin: Zhejiang China
• HS Code: 8517706000
• Production Capacity: 50K/Month

Product Description

Product Features

• Supports 9.95 to 11.3Gb/s bit rates
• Simplex LC Connector
• Hot-pluggable XFP footprint
• Uncooled 1270nm DFB transmitter, 1330nm PIN photo-detector
• Uncooled 1330nm DFB transmitter, 1270nm PIN photo-detector
• Applicable for 40km SMF connection
• Low power consumption, < 2.0 W
• Digital Diagnostic Monitor Interface
• XFP MSA package
• Operating case temperature: Commerical:0 to 70 °C Industrial:-40 to 85 °C

 

Applications

• 10GBASE-ER at 10.3125Gbps
• 10GBASE-EW at 9.953Gbps
• Other optical link

 

Product Descriptions

GFC- OLXBxx1XL-CD40 is compliant with the IEEE803.3ae 10Gbase-Bx. and transmission distance up to 40km on SMF .The transceiver module comprises a transmitter with a 1270 or 1330nm DFB laser transmitter, an integrated 1330 or 1270nm detector preamplifier(IDP) mounted in an optical header and a limiting post-amplifier IC. Transmitter and receiver are separate within a wide temperature range of 0ºC to +70ºC for commercial temperature, -40 to 85 °C for industrial temperature, and offers optimum heat dissipation and excellent electromagnetic shielding for 10 GbE systems application.

Functional Diagram

Absolute Maximum Ratings
 

Parameter	Symbol	Min.	Max.	Unit	Note
Supply Voltage	Vcc	-0.5	4.0	V
Storage Temperature	TS	-40	85	°C
Relative Humidity	RH	0	85	%

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.


 

General Operating Characteristics

 

Parameter	Symbol	Min.	Typ	Max.	Unit	Note
Data Rate	DR	9.95	10.3125	11.3	Gb/s
Supply Voltage	Vcc	3.13	3.3	3.47	V
Supply Current	Icc5			550	mA
Operating Case Temp.	Tc	0		70	°C
	TI	-20		85

Electrical Characteristics (T_OP(C) = 0 to 70 ºC, T_OP(I) =-40 to 85 ºC,V_CC = 3.13 to 3.47 V)
 

Parameter	Symbol	Min.	Typ	Max.	Unit	Note
Transmitter
Differential data input swing	VIN,PP	120		820	mVpp
Transmit Disable Voltage	VD	2.0		Vcc	V	1
Transmit Enable Voltage	VEN	Vee		Vee+0.8
Input differential impedance	Rin		100		Ω	2
Transmit Disable Assert Time	Tda			10	us
Receiver
Differential data output swing	Vout,pp	340		850	mVpp	3
Output rise time and fall time	Tr, Tf			38	Ps	4
LOS Fault	VLOS_F	VCC-0.5		Vcc	V	5
LOS Normal	VLOS_N	Vee		Vee+0.5	V	5

Notes:

1. Or open circuit.
2. After internal AC coupling.
3. Into 100 ohms differential termination. 4. 20 - 80 %.

5. Loss Of Signal is open collector to be pulled up with a 4.7k~ 10k resistor to 3.15 - 3.6V. Logic 0,indicates normal operation; logic 1 indicates no signal detected.


Optical Characteristics (T_OP(C) = 0 to 70 ºC, T_OP(I) =-40 to 85 ºC,V_CC = 3.13 to 3.47 V)
 

Parameter	Symbol	Min.	Typ	Max.	Unit	Note
Transmitter
Operating Wavelength	λ	1260	1270	1280	nm
		1320	1330	1340
Ave. output power (Enabled)	PAVE	0		5	dBm	1
Side-Mode Suppression Ratio	SMSR	30			dB
Optical Modulation Amplitude	POMA	-2.1		0	dB	OMA
Extinction Ratio	ER	4	5		dB
RMS spectral width	Δλ			0.45	nm
Rise/Fall time (20%~80%)	Tr/Tf			45	ps
Dispersion penalty	TDP			3.2	dB
Relative Intensity Noise	RIN			-130	dB/Hz
Output Optical Eye	Compliant with IEEE 0802.3ae
Receiver
Operating Wavelength	λ	1320	1330	1340	nm
		1260	1270	1280
Receiver Sensitivity	PSEN2			-15	dBm	2
Average Receive Power	PAVE			0.5	dBm
Receiver Reflectance	Rrx			-12	dB
LOS Assert	Pa	-30			dBm
LOS De-assert	Pd			-16	dBm
LOS Hysteresis	Pd-Pa	0.5			dB

Notes:

1. Average power figures are informative only, per IEEE 802.3ae.
2. Measured with worst ER; BER<10-12; 231 - 1 PRBS.

Management Interface

The OLXBxx1XL-C(I)D40,incorporates an XFP-compliant, two-wire management interface which is used for serial ID, digital diagnostics, and certain control functions. It is modeled on the SFF-8472 specification modified to accommodate a single two-wire interface address. In addition to the basic I2C read/write functionality, the modules support packet error checking that, when enabled, allows the host system to confirm the validity of any read data. Details of the protocol and interface are explicitly described in the MSA. Please refer to the MSA for design reference.The digital diagnostic memory map specific data field defines as following:

Typical Interface Ciruit

Package Dimensions