Optical Fiber RoHS Compliant 10GB/S XFP CWDM 10km Optical Transceiver

• Usage: Telephone
• Type: Wireless
• Support Network: GSM
• Information content: Data
• Certification: CE, ISO, RoHS
• Condition: New
• Model NO.: GFC-OLXCxx1XL-C(I)D10
• Delivery Time: 3-7 Days
• Warranty: 3 Years
• Distance: 10km
• Transport Package: Antistatic Bag
• Specification: 10KM
• Trademark: GFC
• Origin: Zhejiang China
• HS Code: 8517706000
• Production Capacity: 50K/Month

Product Description

Product Features

• Supports 9.95 to 11.3Gb/s bit rates
• Duplex LC connector
• Hot-pluggable XFP footprint
• Uncooled 1270nm~1610nm DFB transmitter, PIN photo-detector
• Applicable for 20km SMF connection
• Low power consumption, <1.5W
• Digital Diagnostic Monitor Interface
• Operating case temperature:

Commerical:0 to 70 °C Industrial:-40 to 85°C
 

Applications

• 10GBASE-LR/LW at 10.3125Gbps
• 10G Ethernet
• Other optical links

 

Product Descriptions

GFC-OLXCxx1XL-C(I)D10 CWDM DFB 10Gbps XFP transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 20km. This transceiver consists of two sections: The transmitter section incorporates a CWDM DFB laser. And the receiver section consists of a PIN photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.
 

Functional Diagram

Absolute Maximum Ratings
 

Parameter	Symbol	Min.	Max.	Unit	Note
Supply Voltage	Vcc	-0.5	4.0	V
Storage Temperature	TS	-40	85	°C
Relative Humidity	RH	0	85	%

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.


 

General Operating Characteristics

 

Parameter	Symbol	Min.	Typ	Max.	Unit	Note
Data Rate	DR	9.95		11.3	Gb/s
Supply Voltage	Vcc	3.13	3.3	3.47	V
Supply Current	Icc5			450	mA
Operating Case Temp.	Tc	0		70	°C
	TI	-40		85	°C

Electrical Characteristics (T_OP(C) = 0 to 70 ºC, T_OP(I) = -40 to 85 ºCV_CC = 3.13 to 3.47 V)
 

Parameter	Symbol	Min.	Typ	Max.	Unit	Note
Transmitter
Differential data input swing	VIN,PP	120		820	mVpp
Transmit Disable Voltage	VD	2.0		Vcc	V	1
Transmit Enable Voltage	VEN	Vee		Vee+0.8
Input differential impedance	Rin		100		Ω	2
Transmit Disable Assert Time	Tda			10	us
Receiver
Differential data output swing	Vout,pp	340		800	mVpp	3
Output rise time and fall time	Tr, Tf			38	Ps	4
LOS Fault	VLOS_F	VCC-0.5		Vcc	V	5
LOS Normal	VLOS_N	Vee		Vee+0.5	V	5

Notes:

1. Or open circuit.
2. After internal AC coupling.
3. Into 100 ohms differential termination. 4. 20 - 80 %.

5. Loss Of Signal is open collector to be pulled up with a 4.7k~ 10k resistor to 3.15 - 3.6V. Logic 0,indicates normal operation; logic 1 indicates no signal detected.


.

Optical Characteristics (T_OP(C) = 0 to 70 ºC, T_OP(I) =-40 to 85 ºC,V_CC = 3.13 to 3.47 V)
 

Parameter	Symbol	Min.	Typ	Max.	Unit	Note
Transmitter
Operating Wavelength	λ	λ-7.5nm	λ	λ+7.5nm	nm
Ave. output power	PAVE	-3		+3	dBm	1
Optical Modulation Amplitude	POMA	-4.8		0	dB	OMA
Extinction Ratio	ER	4.5	5.5		dB
RMS spectral width	Δλ			0.45	nm
Dispersion penalty	TDP			3.2	dB
Relative Intensity Noise	RIN			-130	dB/Hz
Tx Jitter	TJ	Compliant with IEEE 802.3ae
Receiver
Operating Wavelength	λ	1260		1620	nm
Receiver Sensitivity	PSEN			-14.4	dBm	2
Overload	Pmax	0.5			dBm
Receiver Reflectance	Rrx			-12	dB
LOS Assert	Pa	-30			dBm
LOS De-assert	Pd			-17	dBm
LOS Hysteresis	Pd-Pa	0.5			dB

Notes:

1. The wavelength λ =1270nm~1610nm, Total 18 wavelengths,20nm spacing
2. Measured at 10.3125b/s with PRBS 231 - 1 NRZ test pattern.
3. Under the ER worst case=5, measured at 10.3125 Gb/s with PRBS 231 - 1 NRZ test pattern for BER < 1x10-12

 

Management Interface

The OLXCxx1XL-C(I)D10,incorporates an XFP-compliant, two-wire management interface which is used for serial ID, digital diagnostics, and certain control functions. It is modeled on the SFF-8472 specification modified to accommodate a single two-wire interface address. In addition to the basic I2C read/write functionality, the modules support packet error checking that, when enabled, allows the host system to confirm the validity of any read data. Details of the protocol and interface are explicitly described in the MSA. Please refer to the MSA for design reference.The digital diagnostic memory map specific data field defines as following:

Typical Interface Ciruit

Package Dimensions