Basic Info.
Model NO.
GFC-OLCFxxTXL-CD1(3)0R
Usage
Telephone, Computer, Workstation, Server, Mobile phone, Laptop
Certification
CE, ISO, RoHS
Transport Package
Antistatic Bag
Specification
100Gbps 10KM
Product Description
Product Features
- Supports up to 112Gbps bit rates
- Duplex LC connector
- Hot pluggable
- PIN or APD ROSA
- Operating electrical serial data rate up to 27.952493Gbps
- 4 parallel electrical serial interface
- Applicable for 10km(PIN) or 30km(APD) SMF connection
- Low power consumption, < 3W
- Digital Diagnostic Monitor Interface
- MDIO Communication Interface
- Compliant with 100GBASE-LR4,ER4 and OTU4
- Operating case temperature: Commerical:0 to 70 °C
Applications- Local Area Network(LAN)
- Wide Area Network(WAN)
- Switch to router interface
- ITU-T OTU4 OTL4.4
Standards- Compliant with IEEE 802.3ba
- Compliant with CFP2 MSA hardware specifications
- Compliant with CFP2 MSA management specifications
- Compliant with ITU-T G709/Y.1331
- Compliant with RoHS
Functional Description
OLCFXXTXL-CD1(3)0R, 100G CFP2 LR4 or ER4 optical receiver integrates the 4 receive paths onto one module. On the receive side, 4 lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a PIN photodetector or APD and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and MDIO management interface.
Functional Diagram
Absolute Maximum Ratings Parameter | Symbol | Min. | Max. | Unit | Note |
Supply Voltage | Vcc | -0.5 | 3.6 | V | |
Storage Temperature | TS | -40 | 85 | °C | |
Relative Humidity | RH | 0 | 85 | % | |
Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.Recommended Operating Conditions
Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
Data Rate | DR | | 103.2 | 112 | Gb/s | |
Supply Voltage | Vcc | 3.14 | 3.3 | 3.46 | V | |
Operating Case Temp. | Tc | 0 | | 70 | °C | |
Electrical Characteristics(Tested under recommended operating conditions,unless otherwise noted) Parameter | Symbol | Unit | Min | Typ | Max | Notes |
Voltage Supply Electrical Characteristics |
Supply Current | Icc | A | | | 1 | |
Power Supply Noise | Vrip | | | | 2% DC | 1MHz |
3% 1 | 10MHz |
Total Dissipation Power | Pw | W | | | 3 | |
Low Power Mode Dissipation | Plow | W | | | 2 | |
Inrush Current | Class1 | and | I-inrush | mA/usec | | | 100 | |
Turn-off Current | Class2 | I-turnoff | mA/usec | -100 | | | |
Inrush Current | Class3 | and | I-inrush | mA/usec | | | 200 | |
Turn-off Current | Class4 | I-turnoff | mA/usec | -200 | | | |
Different Signal Electrical Characteristics |
Single Ended Data Input Swing | | mV | 20 | | 525 | |
Single Ended Data Output Swing | | mV | 180 | | 385 | |
Differential Signal Output Resistance | | Ω | 80 | | 120 | |
Differential Signal Input Resistance | | Ω | 80 | | 120 | |
3.3V LVCMOS Electrical Characteristics |
Input High Voltage | 3.3VIH | V | 2.0 | | Vcc+0.3 | |
Input Low Voltage | 3.3VIL | V | -0.3 | | 0.8 | |
Input Leakage Current | 3.3IIN | uA | -10 | | +10 | |
Output HighVoltage (IOH=100uA) | 3.3VOH | V | Vcc-0.2 | | | |
Output Low Voltage (IOL=100uA) | 3.3VOL | V | | | 0.2 | |
Minimum Pulse Width of Control Pin Signal | t_CNTL | us | 100 | | | |
1.2V LVCMOS Electrical Characteristics |
Input High Voltage | 1.2VIH | V | 0.84 | | 1.5 | |
Input Low Voltage | 1.2VIL V | 0.3 | 1.2VIL V | | 0.36 | |
Input Leakage Current | 1.2IIN | uA | -100 | | +100 | |
Output High Voltage | 1.2VOH | V | 1.0 | | 1.5 | |
Output Low Voltage | 1.2VOL | V | -0.3 | | 0.2 | |
Output High Current | 1.2IOH | mA | | | -4 | |
Output Low Current | 1.2IOL | mA | +4 | | | |
Input Capacitance | Ci | pF | | | 10 | |
High Speed Electrical Characteristics Parameter | Symbol | Unit | Min. | Max. | Notes |
Impedance | Zd | Ω | 90 | 110 | |
Frequency | | MHz | 161.1328125 | 1/64 of electrical lane rate |
Frequency Stability | △f | ppm | -100 | 100 | For Ethernet |
-20 | 20 | For Telecom |
Differential Voltage | VDIFF | mV | 400 | 900 | Peak to Peak Differential |
Common mode noise (rms) | | mV | | 17.5 | |
RMS jitter | | ps | | 10 | Random Jitter Over frequency band of 10KHZ<f<10MHZ |
Clock Duty Cycle | | % | 40 | 60 | |
Optical Characteristics(Tested under recommended operating conditions,unless otherwise noted) Parameter | Symbol | Unit | Min | Typ | Max | Notes |
Optical Receiver Characteristics |
Receive Rate for Each Lane | | Gbps | | 25.78125 | 27.9525 | |
Overload Input Optical Power | Pmax | dBm | 5.5 | | | 3 |
Average Receive Power for Each Lane | Pin | dBm | -8.6 + | | 3 | 4, 5 |
Receive Power In OMA for Each Lane | PinOMA | dBm | | | 3 | |
Difference in Receive Power in OMA between Any Two Lanes | | dBm | | | | |
Receiver Sensitivity in OMA for Each Lane (PIN) | SOMA1 | dBm | | | -8.6 | 6 |
Receiver Sensitivity in OMA for Each Lane (APD) | SOMA2 | dBm | | | -16 | 6 |
Stressed Receiver Sensitivity in OMA for Each Lane(PIN) | | dBm | | | -6.8 | 7, 8 |
Stressed Receiver Sensitivity in | | | | | -13 | 7, 8 |
OMA for Each Lane(APD) | | | | | | |
Notes:
- The supply current includes CFP2 module's supply current and test board workingcurrent.
- Average launch power, each lane (min) is informative for 100GBase-LR4, not the principal indicator of signal strength.
- The receiver shall be able to tolerate , without damage, continuous exposure to an optical input signal having this average power level
- The average receive power , each lane (max) for 100GBASE-ER4 is larger than the
100BASE-ER4 transmitter value to allow compatibility with 100BASE-LR4 units at short distances- Average receive power, each lane (min) is informative and not the principal indicator
of signal strength. A received power below this value cannot be compliant; however, a value above this does not ensure compliance- Receiver sensitivity (OMA), each lane (max) is informative
- Measured with conformance test signal at TP3 for BER=10-12
- conditions of stressed receiver sensitivity test: vertical eye closure penalty for each lane is 1.8dB;stressed eye J2 jitter for each lane is 0.3UI; stressed eye J9 jitter for each lane is 0.47UI.
Address:
3rd Floor, Building 69, Headquarters Business Garden, Nanhu District, Jiaxing, Zhejiang, China
Business Type:
Manufacturer/Factory, Group Corporation
Business Range:
Electrical & Electronics, Manufacturing & Processing Machinery, Service, Textile
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
As the fixed supplier of the three China National Telecommunications Services Providers (China Mobile, China Unicom and China Telecom). Zhejiang GuangFan Communications Technology Co., Ltd. (member of G. F. Group) has been specializing in communication industry since 2011.
Our trading company and manufacture plant both locate in Jiaxing City, which is in the east of China, with a distance of about 1.5hours by car from Shanghai City. Based on the best geographical position, we can send the products to the customers all over the world economically and efficiently. With own standardize factory and professional team, we promise to provide you high-quality products, professional service and competitive price.
Our aim is to be one of the most professional products, system and service provider in the communication industry. Expecting to become your long-term partner in China.