Optical Fiber RoHS Compliant 10GB/S SFP+ Bi-Directional Transceiver, 100km Reach

• Usage: Telephone
• Type: Wireless
• Support Network: GSM
• Information content: Data
• Certification: CE, ISO, RoHS
• Condition: New
• Model NO.: GFC-OLSBxx1XL-CDH1
• Delivery Time: 3-7 Days
• Warranty: 3 Years
• Distance: 100km
• Transport Package: Antistatic Bag
• Specification: 10G 100KM
• Trademark: GFC
• Origin: Zhejiang China
• HS Code: 8517706000
• Production Capacity: 50K/Month

Product Description

Product Features

• Supports 9.95 to 11.3Gb/s bit rates
• Simplex LC Connector
• Hot pluggable SFP+ footprint
• Cooled 1530nm EML transmitter, 1550nm APD receiver
• Cooled 1550nm EML transmitter, 1530nm APD receiver
• Applicable for 100km SMF connection
• Low power consumption, < 1.5W
• Digital Diagnostic Monitor Interface
• Optical interface compliant to IEEE 802.3ae 10GBASE-ZR
• Electrical interface compliant to SFF-8431
• Operating case temperature: Commerical:0 to 70 °C

Applications

• 10.3125Gbps Ethernet
• Other optical link

Product Descriptions
GFC-OLSBxx1XL-CDH1 series single mode transceiver is small form factor pluggable module for optical data communications such as 10G Ethernet. It is with the SFP+ 20-pin connector to allow hot plug capability. The OLSBxx1XL-CDH1 module is designed for single mode fiber and operates at a nominal wavelength of 1530nm or 1550nm; The transmitter section uses a EML laser, which is class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section consists of a APD photodiode integrated with a TIA. The transceiver designs are optimized for high perform -ance and cost effective to supply customers the best solutions for telecommunication.

Functional Diagram

Absolute Maximum Ratings
 

Parameter	Symbol	Min.	Max.	Unit	Note
Supply Voltage	Vcc	-0.5	4.0	V
Storage Temperature	TS	-40	85	°C
Relative Humidity	RH	0	85	%

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.


 

General Operating Characteristics

 

Parameter	Symbol	Min.	Typ	Max.	Unit	Note
Data Rate	DR	9.95	10.3125	11.3	Gb/s
Supply Voltage	Vcc	3.13	3.3	3.47	V
Supply Current	Icc5			450	mA
Operating Case Temp.	Tc	0		70	°C

Electrical Characteristics (_TOP(C) = 0 to 70 ºC, V_CC = 3.13 to 3.47 V)
 

Parameter	Symbol	Min.	Typ	Max.	Unit	Note
Transmitter
Differential data input swing	VIN,PP	120		850	mVpp	1
Transmit Disable Voltage	VD	VCC-0.8		Vcc	V
Transmit Enable Voltage	VEN	Vee		Vee+0.8
Input differential impedance	Rin		100		Ω
Receiver
Differential data output swing	Vout,pp	300		850	mVpp	2
Output rise time and fall time	Tr, Tf	28			Ps	3
LOS asserted	VLOS_F	VCC-0.8		Vcc	V	4
LOS de-asserted	VLOS_N	Vee		Vee+0.8	V	4

Notes:

1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
2. Into 100 differential termination.
3. 20 - 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1's and four 0's sequence in the PRBS 9 is an acceptable alternative.
4. LOS is an open collector output. Should be pulled up with 4.7k - 10k on the host board. Normal operation is logic 0; loss of signal is logic 1.

Optical Characteristics (T_OP(C) = 0 to 70 ºC, T_OP(I) =-40 to 80 ºC,V_CC = 3.13 to 3.47 V)
 

Parameter	Symbol	Min.	Typ	Max.	Unit	Note
Transmitter
Operating Wavelength	λ	1525.5	1530	1537.5	nm
		1542.5	1550	1557.5
Ave. output power (Enabled)	PAVE	0		5	dBm	1
Side-Mode Suppression Ratio	SMSR	30			dB
Extinction Ratio	ER	9			dB
RMS spectral width	Δλ			1	nm
Rise/Fall time (20%~80%)	Tr/Tf			50	ps
Dispersion penalty	TDP			3.2	dB
Relative Intensity Noise	RIN			-128	dB/Hz
Output Optical Eye	Compliant with IEEE 0802.3ae
Receiver
Operating Wavelength	λ	1542.5	1550	1557.5	nm
		1522.5	1530	1557.5
Receiver Sensitivity	PSEN1			-24	dBm	2
Overload	PAVE			-7	dBm
LOS Assert	Pa	-35			dBm
LOS De-assert	Pd			-24	dBm
LOS Hysteresis	Pd-Pa	0.5			dB

Notes:

1. Average power figures are informative only, per IEEE 802.3ae.
2. Measured with worst ER=9; BER<10-12; 231 - 1 PRBS.

Digital Diagnostic Specifications

The OLSBxx1XL-CDH1 transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics.



 

Parameter	Symbol	Units	Min.	Max.	Accuracy	Note
Transceiver temperature	DTemp-E	ºC	-5	+75	±5ºC	1
Transceiver supply voltage	DVoltage	V	2.8	4.0	±3%
Transmitter bias current	DBias	mA	0	127	±10%	2
Transmitter output power	DTx-Power	dBm	-2	+7	±2dB
Receiver average input power	DRx-Power	dBm	-26	0	±2dB

Notes:

1. Internally measured
2. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the laser

 

Typical Interface Circuit

Recommended power supply filter

Package Dimensions