Optical Fiber RoHS Compliant 10GB/S XFP Bi-Directional Transceiver, 100km Reach

• Usage: Telephone, Computer, Workstation, Server, Mobile phone, Laptop
• Type: Wireless
• Support Network: GSM
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: GFC-OLXBxx1XL-CDH1
• Information content: Data
• Certification: CE, ISO, RoHS
• Condition: New
• Delivery Time: 3-7 Days
• Warranty: 3 Years
• Distance: 100km
• Transport Package: Antistatic Bag
• Specification: 10G
• Trademark: GFC
• Origin: Zhejiang China
• HS Code: 8517706000
• Production Capacity: 50K/Month

Product Description

Product Features

• Supports 9.95 to 11.3Gb/s bit rates
• Simplex LC Connector
• Hot-pluggable XFP footprint
• Cooled 1530nm EML transmitter, 1550nm APD receiver
• Cooled 1550nm EML transmitter, 1530nm APD receiver
• Applicable for 100km SMF connection
• Low power consumption, < 3.5W
• Digital Diagnostic Monitor Interface
• Optical interface compliant to IEEE 802.3ae 10GBASE-ZR
• Electrical interface compliant to SFF-8431
• Operating case temperature: Commerical:0 to 70 °C

Applications

• 10GBASE-BX 10.3125Gb/s Ethernet
• 10GBASE-BX 9.953Gb/s Ethernet
• SONET OC-192 &SDH STM I-64.1
• Other optical link

Product Descriptions
GFC-OLXBxx1XL-CDH1 transceivers are designed for 10G Ethernet 10G, and it can supportdata-rate from 9.953Gb/s to 11.3Gb/s.Digital diagnostics are avail-able via I2C interface as specified in the XFP MSA.The transceiver designs are optimized for high per-formance and cost effective to supply customers the best solutions for data-com and telecom applications.

Functional Diagram

Absolute Maximum Ratings
 

Parameter	Symbol	Min.	Max.	Unit	Note
Supply Voltage	Vcc	-0.5	4.0	V
Storage Temperature	TS	-40	85	°C
Relative Humidity	RH	0	85	%

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.


 

General Operating Characteristics

 

Parameter	Symbol	Min.	Typ	Max.	Unit	Note
Data Rate	DR	9.95	10.3125	11.3	Gb/s
Supply Voltage	Vcc	3.13	3.3	3.47	V
Supply Current	Icc5			450	mA
Operating Case Temp.	Tc	0		70	°C

Electrical Characteristics (_TOP(C) = 0 to 70 ºC, V_CC = 3.13 to 3.47 V)
 

Parameter	Symbol	Min.	Typ	Max.	Unit	Note
Transmitter
Differential data input swing	VIN,PP	120		850	mVpp	1
Transmit Disable Voltage	VD	VCC-0.8		Vcc	V
Transmit Enable Voltage	VEN	Vee		Vee+0.8
Input differential impedance	Rin		100		Ω
Receiver
Differential data output swing	Vout,pp	300		850	mVpp	2
Output rise time and fall time	Tr, Tf	28			Ps	3
LOS asserted	VLOS_F	VCC-0.8		Vcc	V	4
LOS de-asserted	VLOS_N	Vee		Vee+0.8	V	4

Notes:

1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.
2. Into 100 differential termination.
3. 20 - 80%. Measured with Module Compliance Test Board and OMA test pattern. Use of four 1's and four 0's sequence in the PRBS 9 is an acceptable alternative.
4. LOS is an open collector output. Should be pulled up with 4.7k - 10k on the host board. Normal operation is logic 0; loss of signal is logic 1.

Optical Characteristics (_TOP(C) = 0 to 70 ºC,V_CC = 3.13 to 3.47 V)
 

Parameter	Symbol	Min.	Typ	Max.	Unit	Note
Transmitter
Operating Wavelength	λ	1522.50	1530	1537.5	nm
		1542.5	1550	1557.5
Ave. output power (Enabled)	PAVE	0		5	dBm	1
Side-Mode Suppression Ratio	SMSR	30			dB
Extinction Ratio	ER	9			dB
RMS spectral width	Δλ			1	nm
Rise/Fall time (20%~80%)	Tr/Tf			50	ps
Dispersion penalty	TDP			3.2	dB
Relative Intensity Noise	RIN			-128	dB/Hz
Output Optical Eye	Compliant with IEEE 0802.3ae
Receiver
Operating Wavelength	λ	1542.5	1550	1557.5	nm
		1522.50	1530	1537.5
Receiver Sensitivity	PSEN			-24	dBm	2
Overload	PAVE			-7	dBm
LOS Assert	Pa	-35			dBm
LOS De-assert	Pd			-25	dBm
LOS Hysteresis	Pd-Pa	0.5			dB

Notes:

1. Average power figures are informative only, per IEEE 802.3ae.
2. Measured with worst ER=9; BER<10-12; 231 - 1 PRBS.

Management Interface

     
       The OLXBxx1XL-CDH1 incorporates an XFP-compliant, two-wire management interface which is used for serial ID, digital diagnostics, and certain control functions. It is modeled on the SFF-8472 specification modified to accommodate a single two-wire interface address. In addition to the basic I2C read/write functionality, the modules support packet error checking that, when enabled, allows the host system to confirm the validity of any read data. Details of the protocol and interface are explicitly described in the MSA. Please refer to the MSA for design reference.The digital diagnostic memory map specific data field defines as following:


Typical Interface Ciruit


Package Dimensions