Application: | Communication |
---|---|
Type: | Single-mode Fiber |
Connection Structure: | 0 |
Material Shape: | Round Wire |
Allowed Lateral Pressure: | >1000(N/100mm) |
Allowed Tensile Strength: | >10000N |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Cable Diameter | mm | 2.5 | 2.6 | 3.8 | 4.0 |
Cable Cores | 4-12 | 24 | 24 | 36 | |
Fiber diameter | mm | 250μm | 200μm |
|
250μm |
Micro duct of application | mm | 7/4 | 10/6 | ||
Nominal Cable Weight | Kg/km | 5.5 | 6.5 | 12 | 13.5 |
Temperature Range | Minimum Bend Radius | ||
Transportation & Storage | -25~+70ºC | Load | 20×D |
Operation | -25~+70ºC | Unload | 10×D |
Test | Test Standard | Specified Value | Acceptance Criteria |
Tensile |
IEC 60794-1-2-E1 |
50N |
Additional attenuation absolute value should be less than 0.1dB no damage |
Crush |
IEC 60794-1-2-E3 |
500N/10cm |
Additional attenuation absolute value should be less than 0.1dB no damage |
Impact | IEC 60794-1-2-E4 | 1J, R=300mm, 3points | △α reversible, no damage |
Repeated Bending |
IEC 60794-1-2-E6 |
R=20D, 15N, 25cycles |
Additional attenuation absolute value should be less than 0.1dB no damage |
Torsion |
IEC 60794-1-2-E7 |
20N, 1m, +/-1800 |
Additional attenuation absolute value should be less than 0.1dB no damage |
Temperature Cycling |
IEC 60794-1-2-F1 |
-25~+70ºC, 2cyces, 8h |
Increase in fibre attenuation≤ 0.1dB/Km |
Characteristics | Acceptance Value | |
Attenuation |
@1310nm | ≤0.36dB/km |
@1550nm | ≤0.25dB/km |
Suppliers with verified business licenses